39
Console Basics
Indicator icons:
Lube
- Every 50 hours of use a pop-up window with a message to
lubricate the treadmill belt will show up. This will happen once at 50
hours with the opportunity to choose “Remind me later” or “Done”. If
remind me later is chosen, the pop-up will show up again after another
hour, with the same options. Once 55 hours is reached a pop-up will
show up every time the home screen is displayed, until Done is selected.
(Please refer to the Maintenance and tips section for lubrication
instructions)
.
CAUTION
:
The Intelli-Guard feature will automatically be disengaged
when the treadmill is operated at speeds under 1.0 mph (1.6 kph). If
the speed is within this parameter “Step” will flash. When the “Step” is
flashing, the treadmill will not automatically pause. If the speed is above
1.0 mph (1.6 kph) Intelli-Guard™ will not activate until 25 steps are taken
and counted.
CAUTION
:
At 20 seconds the console will beep once per second for 5
seconds and then automatically pause the treadmill. These beeps are
a notice that the treadmill belt is about to stop. If for some reason you
are still on the treadmill when this occurs move your feet to the side
rails and prepare for the belt to stop. The Intelli-Guard feature does
not replace the use of your Safety Key or using proper precaution in
stopping the treadmill when it is not in use.
