L Trim Console
Repetition and Time Counter Optional
An optional battery-operated console is available for use on Insignia Series Selectorized Strength Equipment. The
console tracks workout time, rest time, and number of repetitions per set.
Console Display
1
Repetition Counter
2
Time Counter
Workout Mode
The displays will automatically turn on and begin counting the Repetitions and Time, when both of the work arms are
moved simultaneously. Initially, both the Repetition Counter & the Time Counter will show zeroes.
Repetition Counter
Counts ONE repetition for each complete full repetition, when both work arms are moved simultaneously.
Maximum Repetitions = 99. If the repetitions go beyond 99, the counter rolls over to ONE and begins counting up.
Time Counter
Active Workout
Mode:
The display shows the duration of the exercise being performed (in seconds).
Maximum time = 9:59 (minutes: seconds). If the time reaches 9:59, the counter rolls over to
0:00 and begins counting up.
Rest Workout Mode:
Once the exercise is completed (after 5 seconds), the display goes into Rest Workout Mode.
The time begins to flash and count up from 0:05 displaying the duration of rest between sets.
Both displays automatically reset to zeroes, when both work arms are simultaneously moved
while the unit is in Rest Workout mode (flashing time display).
After 1:30 in Rest Workout Mode (flashing time display), the unit will automatically go into
Sleep Mode.
Sleep Mode
The console enters Sleep mode after the Rest timer reaches 1:30 (minutes: seconds) without detecting movement.
The display and all electronics, including the processor, are completely turned off to conserve battery power.
Entering and Using the Asset Management Mode
A special Asset Management Mode is available to club owners, managers and other authorized personnel to allow
access to specific product information. The timer displays the total time and total repetitions accumulated over the life
of a unit.
To enter the mode:
1.
Remove the batteries.
2.
Perform 3 repetitions with both work arms simultaneously or wait approximately 10 minutes.
3.
Replace the batteries.
Page 34 of 51
