Elevation 95X-ALLXX-01 Commercial Cross-trainer
“How To…”
57
mark the position
of the idler pulley
assembly here
Timing Belt
Mounting Screw
Mounting
Screw
Idler Pulley
Assembly
Timing Belt
Tension Bolt
HOW TO... REPLACE THE IDLER PULLEY ASSEMBLY
Tools required: Phillips screwdriver, 13mm socket wrench, felt-tip marker
Estimated time required: 45 minutes
1.
If the cross-trainer has line cords, unplug
them from the wall outlets.
2.
Remove the upper rocker assembly cover.
(See the “How To…” on page 51.)
3.
Mark the position of the idler pulley
assembly on the metal plate behind it.
4.
Loosen the two idler pulley assembly
mounting screws.
5.
Loosen the timing belt tension bolt.
6.
Remove and save the two idler pulley
assembly mounting screws.
7.
Remove the idler pulley assembly.
8.
Install the new idler pulley assembly.
Secure it finger tight.
9.
Center the timing belt on all pulleys.
10.
Tighten the timing belt tension bolt until
the idler pulley assembly returns to its
previously marked position.
11.
Tighten the idler pulley assembly
mounting screws.
12.
Re-install the upper rocker assembly
cover.
Summary of Contents for Elevation 95X-ALLXX-01
Page 1: ...Elevation 95X ALLXX 01 Commercial Cross trainer HOW TO...
Page 2: ......
