Elevation 95X-ALLXX-01 Commercial Cross-trainer
“How To…”
36
Phillips Screws (to
front collar dead
shaft cover, 4)
Phillips Screws (to
monocolumn, 2)
Rear Collar
Dead Shaft Cover
Phillips Screws (to
rear collar dead
shaft cover, 2)
Front Collar
Dead Shaft
Cover
HOW TO... REPLACE THE FRONT OR REAR COLLAR DEADSHAFT COVERS
Tools required: Phillips screwdriver
Estimated time required: 20 minutes
1.
If the cross-trainer has line cords,
unplug them from the wall outlets.
2.
Remove the deadshaft end cap
covers. (See the “How To…” on page
32.)
3.
Remove and save the two Phillips
screws that secure the front collar
deadshaft cover to the monocolumn.
4.
Remove and save the four Phillips
screws that secure the front collar
deadshaft cover to the rear collar
deadshaft cover.
5.
Install either the new front collar
deadshaft cover or rear collar
deadshaft cover using the screws
removed and saved in steps 4 and 5.
Summary of Contents for Elevation 95X-ALLXX-01
Page 1: ...Elevation 95X ALLXX 01 Commercial Cross trainer HOW TO...
Page 2: ......
