Elevation 95X-ALLXX-01 Commercial Cross-trainer
“How To…”
62
Generator
Mounting
Bracket
mark the
position of
the bracket
here
Generator
Mounting
Nuts (4)
Tension Bolt
tightening the tension
bolt in the right-hand
hole causes the
generator mounting
bracket to slide up
HOW TO... REPLACE THE GENERATOR ASSEMBLY
Tools required: Phillips screwdriver, 13mm socket wrench, wire cutters, felt-tip marker
Estimated time required: 45 minutes
1.
If the cross-trainer has line cords,
unplug them from the wall outlets.
2.
Remove the rear tower rear cover.
(See the “How To…” on page 50.)
3.
Mark the position of the generator
mounting bracket on the metal plate
behind it.
4.
Loosen the four generator mounting
nuts.
5.
Remove the tension bolt completely
from the hole in the left side of the
mounting bracket.
6.
Insert the tensioning bolt into the
hole in the right side of the bracket
and turn it clockwise. (This will
tighten the bolt and raise the
mounting bracket, allowing the Poly-
V belt to be easily removed from the
generator pulley.)
continued…
Summary of Contents for Elevation 95X-ALLXX-01
Page 1: ...Elevation 95X ALLXX 01 Commercial Cross trainer HOW TO...
Page 2: ......
