Elevation 95X-ALLXX-01 Commercial Cross-trainer
“How To…”
56
Timing
Belt
Tension
Bolt
Washers (3)
Bolts (3)
Idler Pulley
Assembly
HOW TO... REPLACE THE ROCKER ASSEMBLY TIMING BELT
Tools required: Phillips screwdriver, 13mm socket wrench, felt-tip marker
Estimated time required: 45 minutes
1.
If the cross-trainer has line cords,
unplug them from the wall
outlets.
2.
Remove the outside crank cover.
(See the “How To…” on page 52.)
3.
Remove the upper rocker cover.
(See the “How To…” on page 51.)
4.
Mark the position of the idler
pulley assembly on the metal
plate behind it.
5.
Loosen the two idler pulley
assembly mounting screws.
6.
Loosen the timing belt tension
bolt.
7.
Remove and save the idler pulley
assembly mounting screws.
8.
Remove the idler pulley assembly.
9.
Remove the timing belt by first
slipping it off the lower pulley and
then off the upper pulley.
10.
Install the new timing belt on both
pulleys.
11.
Re-install the idler pulley
assembly. Secure it finger tight.
12.
Center the timing belt on all
pulleys.
13.
Tighten the timing belt tension
bolt until the idler pulley assembly
returns to its previously marked
position.
14.
Tighten the idler pulley assembly
mounting screws.
15.
Re-install the upper rocker
assembly cover.
Summary of Contents for Elevation 95X-ALLXX-01
Page 1: ...Elevation 95X ALLXX 01 Commercial Cross trainer HOW TO...
Page 2: ......
