Elevation 95X-ALLXX-01 Commercial Cross-trainer
“How To…”
66
Old Main Cable (still
in the cross-trainer)
New
Main
Cable
carefully tape the ends
of the cables together
attach the
new cable
here
pull the old
cable here
HOW TO... REPLACE THE MAIN CABLE
Tools required: Phillips screwdriver
Estimated time required: 40 minutes
1.
If the cross-trainer has line cords, unplug
them from the wall outlets.
2.
Remove the console back cover. (See the
“How To…” on page 29.)
3.
Remove the console assembly. (See the
“How To…” on page 30.)
4.
Remove deadshaft end cap covers. (See
the “How To…” on page 32.)
5.
Remove the media tray. (See the “How
To….” on page 31.)
6.
Remove the top deadshaft cover. (See the
“How To…” on page 33.)
7.
Remove the rear tower rear cover. (See
the “How To…” on page 50.)
8.
Disconnect the main cable from the
generator control board.
9.
Attach the console connector end of the
new main cable to the generator control
board connector end of the old main
cable.
10.
Pull the old main cable up and out of the
monocolumn until the end with the new
main cable appears.
11.
Plug the new main cable into the
generator control board.
12.
Complete installation of the remaining
components in reverse order using
hardware removed and saved in the
previous steps.
Summary of Contents for Elevation 95X-ALLXX-01
Page 1: ...Elevation 95X ALLXX 01 Commercial Cross trainer HOW TO...
Page 2: ......
