Life Fitness ATV15-XXXA-02, Assembly Instructions Manual

Page: 25 / 36

44 45
25. Secure the attachable TV (4) to the main bracket assembly
using the bolt (1) , washer (2), and nut (3).
26. Connect the cables to the attachable TV (4).
27. Align the lowest side holes on the TV brackets (3) and
main bracket assembly (2).
28. Secure the TV bracket (3) into position using one screw (1)
on each side of the TV bracket.
29. Connect the remote cable (1), high-def cable (2), and power cable (3) to the ports on the back of the console.
30. Reinstall the console.
2
4
1
3
12. Pull the coaxial cable from inside of the console bracket (3).
13. Install the coaxial extension coupler and coaxial extension
cable.
14. Tape the ends of all of the cables together.
15. Feed the taped ends of all of the media cables through the
large hole in the back of the console bracket (3).
16. Side the grommet (1) over the taped end of the media
cables.
17. Feed the taped end of the media cables through the large
hole at the bottom of the main bracket assembly (4), and
route the media cables through the hole at the top of the main bracket assembly (4).
18. Side the grommet (1) over the taped end of the media cables.
19. Install both grommets (1) into the main bracket assembly (4).
20. Install the main bracket caps (1) into the top and bottom of the main
bracket assembly.
21. Attach the main bracket assembly (1) to the
console bracket (2) using the screws (4) and washers (3).
Tighten the screws (4) to 8-10 ft. lbs..
2
3
4
1
22. Place the TV bracket (2) on the attachable TV (1).
23. Place the four washers (3) on the four screws (4).
24. Install the four screws (4). Tighten the four screws (4)
to 8-10 ft. lbs..