36
37
FOR 95C/97C ELEVATION DISCOVER SI UNITS ONLY:
3.
Cable Routing
3a.
Carefully pull the COAXIAL CABLE from inside the CONSOLE BRACKET (15).
3b.
Install the coaxial extension coupler and coaxial extension cable.
3c.
Tape the ends of all CABLES
(Power, Coaxial, I-R Remote Control, Video)
together.
4. Feed the taped end of the MEDIA CABLES (12) through the large hole in the back of the CONSOLE BRACKET (15).
Carefully pull excess media cable through the CONSOLE BRACKET.
5
Slide one GROMMET (16) over the taped end of the MEDIA CABLES (12).
6. Hold the MAIN BRACKET ASSEMBLY (5) close to the CONSOLE BRACKET (15) as shown. With the holes facing
upward, feed the taped end of the MEDIA CABLES (12) through the bottom large hole of the main bracket
assembly and out of the upper hole as shown. Carefully pull excess media cable through the main bracket assem-
bly.
7. Slide the remaining GROMMET (16)
over the taped end of the MEDIA
CABLES (12). Install the grommets
into the access holes.
8. Install the MAIN BRACKET CAP (19)
to the top and bottom of the MAIN
BRACKET ASSEMBLY (5).
9. Secure the MAIN BRACKET
ASSEMBLY (5) using four SCREWS
(17) and WASHERS (18) as shown.
Tighten the screws securely. (8-10
ft. lbs.)
10.
Connect Cables to Console
10a.
Attach the three MEDIA CABLES
(12) to the back of the Discover SI
CONSOLE as shown.
Remote
High-Def
Power
Cross-Trainer & Bikes
Elevation Discover SI Console
95C/97C ELEVATION DISCOVER SI UNITS ONLY
19
19
17
18
16
9
15
12
5
FOR 95C/97C ELEVATION INSPIRE UNITS ONLY:
3.
Cable Routing
3a.
Carefully pull the MEDIA CABLE BUNDLE (12)
(Power & Coaxial)
from inside the CONSOLE BRACKET (15).
3b.
Install the coaxial extension coupler and coaxial extension cable.
3c.
Tape the ends of all CABLES
(Power, Coaxial, I-R Remote Control, Video)
together.
4. Feed the taped end of the MEDIA CABLES (12) through the large hole in the back of the CONSOLE BRACKET (15).
Carefully pull excess media cable through the CONSOLE BRACKET.
5
Slide one GROMMET (16) over the taped end of the MEDIA CABLES (12).
6. Hold the MAIN BRACKET ASSEMBLY (5) close to the CONSOLE BRACKET (15) as shown. With the holes facing
upward, feed the taped end of the MEDIA CABLES (12) through the bottom large hole of the main bracket
assembly and out of the upper hole as shown. Carefully pull excess media cable through the main bracket
assembly.
7. Slide the remaining GROMMET (16) over the taped end of the MEDIA CABLES (12). Install the grommets into the
access holes.
8. Install the MAIN BRACKET CAPS (19) to the top and bottom of the MAIN BRACKET ASSEMBLY (5).
9. Secure the MAIN BRACKET ASSEMBLY (5) using four SCREWS (17) and WASHERS (18) as shown. Tighten the
screws securely. (8-10 ft. lbs.)
10.
Connect Cables to Console
10a.
Connect the I-R REMOTE CONTROL (A) and VIDEO (B) CABLES to the back of the DISPLAY CONSOLE.
95C/97C ELEVATION INSPIRE UNITS ONLY
19
19
17
18
16
9
B
A
15
5
12
Summary of Contents for ATV15-XXXA-02
Page 1: ...1008767 0001 AA 15 ATTACHABLE TV ASSEMBLY INSTRUCTIONS ...
Page 2: ......
