42
43
5. Attach TV (k) to PRIMARY TV BRACKET (d) using four M6 SCREWS (l) and M6 WASHERS (h). Secure CAP (m) to top
of PRIMARY TV BRACKET (d).
6. Secure REMOTE CONTROL to the UPRIGHT frame using the provided DUAL LOCK.
7. Use three CABLE TIE MOUNTS (n) to secure the remote control cable, power cable, and
coaxial cable.
Suggested Cable Tie Mount Locations:
The picture below shows suggested placement indicators for the provided Cable Tie Mounts.
k
m
d
l
h
n
Models: INCSC, INCSX, INCDX
,
R-Series (50L)
1
3
2
1
2
3
4
5
5. Remove the four screws (5) that secure the rear console
cover (1) to the console frame (4).
6. Unclip, and remove the rear console cover (1).
7. Remove the four screws (3) that secure the insert (2).
8. Remove the insert (2).
1. Secure the power block (1) to the underside of the center
frame using the fastener strip.
2. Connect the Power cord (2) to the receptacle.
3. Bundle the excess power cord, and store the bundled cord
under the unit.
4. Connect the coaxial cable (3) to the broadcast supply re-
ceptacle.
2
1
3
9. Remove the four screws (1) that secure the console (3) to the
console frame (2).
10. Attach the TV bracket (4) to the main bracket (7) using four screws
(6) and four washers (5).
11. Tighten the screws (6). Tighten the screws (6) to 8-10 ft. lbs..
Tools Required:
Phillips Screwdriver, Metric Allen Set, M16 & M17 Wrench
Parts Not Used From Kit:
(1) Lower Mounting Bracket
Summary of Contents for ATV15-XXXA-02
Page 1: ...1008767 0001 AA 15 ATTACHABLE TV ASSEMBLY INSTRUCTIONS ...
Page 2: ......
