LIBRETTO EURONORM 600x400, User Manual, Page: 3 / 56

ENGLISH 3
3
GENERAL RECOMMENDATIONS GENERAL RECOMMENDATIONS GENERAL RECOMMENDATIONS GENERAL RECOMMENDATIONS
REC
REC REC
RECEPTION AND DISPOSING OF UNIT
EPTION AND DISPOSING OF UNIT EPTION AND DISPOSING OF UNIT
EPTION AND DISPOSING OF UNIT
INTENDED USE
The device should not be used by people (including children) of limited
physical or motor capacity, or who lack the necessary skill or expertise,
unless aided or instructed by another person responsible for their safety.
Children should be supervised to ensure they do not play with the
device.
This appliance are designed for indoor use and should only be used to
store food and beverages. The manufacturer shall not be held liable for
the consequences resulting from unintended uses of this appliance.
Do not store food in direct contact with the structure.
Both the appliance’s construction features and the condensing unit’s
capacity have been designed to store only pre-cooled products. Never
place carbonated beverages into the low-temperature compartment as
they may explode. Never place liquids or hot food into the appliance and
do not fill lidded containers to the top.
In all appliances there are surfaces subject to frosting. Depending on the
model, frost may be melted away either automatically (automatic defrost)
or manually. Never attempt to remove frost using a pointed object
because in this way you could irreparably damage the appliance.
Do not use any mechanical device or other artificial means to accelerate
the defrost process.
The Manufacturer declines all responsibility, and the warranty shall be
null and void, if electrical and/or mechanical alterations are made to the
product.
The warranty shall also be null and void if the product is tampered with
or, in general, in case of alterations not expressly authorised and not
made in compliance with the instructions given herein.
CONTROLS AT RECEPTION
The refrigerators are shipped in appropriate protective packing. On arrival,
check that the appliance has not incurred transport damage and that it is
complete according to the order.
In the event of visible damage
immediately note the damage on the transport documents with the
following wording:
“RECEIVED WITH RESERVE FOR EVIDENT DAMAGE OF PACKING”
since the delivery terms are ex factory this involves reimbursement of
damages by the insurance company.
IMPORTANT
ALL THE OPERATIONS INDICATED BELOW MUST BE PERFORMED IN
RESPECT OF EXISTING SAFETY REGULATIONS, BOTH FOR THE
EQUIPMENT IN USE AND FOR THE OPERATING PROCEDURES
WARNING
BEFORE BEGINNING HANDLING OPERATIONS ENSURE THAT
THE LIFTING CAPACITY IS SUFFICIENT FOR THE APPLIANCE
IN QUESTION
HANDLING
HANDLING with FORK LIFT or SIMILAR
Insert the forks into the side of back of the wooden pallet supplied with the
appliance.
Begin lifting checking that the appliance is in stable equilibrium.
WARNING
DURING HANDLING OPERATIONS DO NOT TIP OR
TURNOVER
IF IT’S NECESSARY TO TRANSPORT APPLIANCE HORIZONTALY;
YOU HAVE TO WAIT AT LEAST 2 HOURS BEFORE OPERATING.
WARNING
THE RESPECT OF THE RECOMMENDATIONS PRINTED ON
THE OUTSIDE OF THE PACKING IS A GUARANTEE OF A
SOUND PHYSICAL AND OPERATING CONDITION OF THE
APPLIANCE ALL TO THE ADVANTAGE OF THE END-USER.
THEREFORE THE FOLLOWING IS RECOMMENDED:
•
HANDLE WITH CARE
•
KEEP DRY
•
STACKING OF OTHER OBJECTS ON THE APPLIANCE MUST BE
ABSOLUTELY AVOIDED.
UNPACKING
Cardboard packing
Cut the band straps with scissors
Lift the carton (the corner padding will also slide off).
Wooden packing
Unnail the wodden panels starting with the front and top.
Slide off the nylon wrapping over the top of the unit.
Nylon packing
After having removing the adhesive tape, slide off the nylon wrapping
over the top of the unit.
Lift the appliance to separate it from the pallet.
Place the appliance on the ground in its chosen position.
Check for visible damage.
Keep the packing out of the reach of children as it could be a danger
hazard.
Dispose of the packing to the specialised collection or recycling points
(respect existing regulations).
Check that the serial number corresponds to the transport documents.
DISPOSAL OF UNIT
Our appliances contain the refrigerant shown on the corresponding
rating plate as per Regulation (EC) No. 2037/2000 of 29 June 2000; in
addition, the appliance is composed of reusable or recyclable parts and
materials. Therefore, at the end of its lifetime, the appliance should be
delivered to a specific disposal centre. The best method to ensure that
no one will remain trapped inside is to take off the door completely.
The appliance must not be disposed of together with household waste
and metal scrap.
Absolutely avoid damaging the refrigeration circuit, particularly near the
heat exchanger.
IMPORTANT
COMPLY WITH LOCAL REGULATIONS IN FORCE
CONCERNING THE FINAL DISPOSAL OF THIS TYPE OF
EQUIPMENT.