Libelium Waspmote Technical Manual Download

Page: 34 / 171

-34-

v6.3

Waspmote Plug & Sense! - Encapsulated Line

2.1.8.7. Smart Parking

The Plug & Sense! Smart Parking node allows to detect available parking spots by placing the node on the pavement. It works

with a magnetic sensor which detects when a vehicle is present or not.

The node benefits from Sigfox and LoRaWAN technologies (868 and 900 MHz bands), getting ubiquitous coverage with few

base stations. The device is very optimized in terms of power consumption, resulting in a long battery life. Its small size and the

robust and surface-mount enclosure enables a fast installation, without the need of digging a hole in the ground. Finally, the

developer does not need to program the node, but just configure some key parameters. Remote management and bidirectional

communication allow to change parameters from the Cloud.

Figure: Plug & Sense! Smart Parking node

There are specific documents for parking applications at

Libelium website

. Refer to Smart Parking Technical Guide to see

typical applications for this model and how to make a good installation.

Summary of Contents for Waspmote












































































































































































Search results

Summary of Contents for Waspmote

Reviews:

Related manuals for Waspmote

Brands by name

Popular brands

Libelium Waspmote, Technical Manual

Search results

Summary of Contents for Waspmote

Reviews:

Related manuals for Waspmote

Brands by name

Popular brands