-148-
v6.3
Interacting with Waspmote
These parameters must be also configured in the Waspmote sensor nodes. Access to all the information related to Waspmote at:
http://www.libelium.com/waspmote
Figure: XBee parameters configuration
To discover the MAC address of the XBee module just press the “Load MAC” button.
The “Check status” option allows to see if the radio is working properly and if the configuration stored on it matches the values
set in the Manager System.
Both process (“Load MAC” and “Check status”) require the capturer daemon to be stopped. This means no frames will be
received while executing this actions. Be patient this can take up to 1 minute to finish.
Figure: XBee parameters configuration
