Libelium Waspmote Technical Manual Download

Page: 18 / 171

-18-

v6.3

Waspmote Plug & Sense! - Encapsulated Line

2.1.6. Program in minutes

In order to program the nodes an intuitive graphic interface has been developed. Developers just need to fill a web form in

order to obtain the complete source code for the sensor nodes. This means the complete program for an specific application

can be generated just in minutes. Check the Code Generator to see how easy it is at:

http://www.libelium.com/development/plug_&_sense/sdk_and_applications/code_generator

Figure: Code Generator

2.1.7. Data to the Cloud

The Sensor data gathered by the Waspmote Plug & Sense! nodes is sent to the Cloud by

Meshlium

, the Gateway router specially

designed to connect Waspmote sensor networks to the Internet via Ethernet, WiFi and 3G interfaces.

Thanks to Meshlium’s new feature, the Sensor Parser, now it is easier to receive any frame, parse it and store the data into a local

or external Data Base.

Figure: Meshlium

Summary of Contents for Waspmote












































































































































































Search results

Summary of Contents for Waspmote

Reviews:

Related manuals for Waspmote

Brands by name

Popular brands

Libelium Waspmote, Technical Manual

Search results

Summary of Contents for Waspmote

Reviews:

Related manuals for Waspmote

Brands by name

Popular brands