Libelium Waspmote Technical Manual Download

Page: 105 / 171

-105-

v6.3

Expansion Radio Board

20. Expansion Radio Board

The Expansion Board allows to connect two communication modules at the same time in the Waspmote sensor platform. This

means a lot of different combinations are possible using any of the wireless radios available for Waspmote:

802.15.4, ZigBee,

DigiMesh, 868 MHz, 900 MHz, LoRaWAN, LoRa, Sigfox, Bluetooth Pro, Bluetooth Low Energy, RFID/NFC, WiFi, GPRS Pro,

GPRS+GPS

and

3G/GPRS.

Besides, the following Industrial Protocols modules are available: RS-485/Modbus, RS-232 Serial/

Modbus and CAN Bus.

Figure: Expansion Radio Board

Some of the possible combinations are:

•

LoRaWAN - GPRS

•

802.15.4 - Sigfox

•

868 MHz - RS-485

•

RS-232 - WiFi

•

DigiMesh - 3G/GPRS

•

RS-232 - RFID/NFC

•

WiFi - 3G/GPRS

•

CAN bus - Bluetooth

•

etc.

Remark

: GPRS Pro, GPRS+GPS and 3G/GPRS modules do not need the Expansion Board to be connected to Waspmote. They can be plugged

directly in the socket1.

Applications:

•

Multifrequency Sensor Networks (2.4GHz - 868/900MHz)

•

Bluetooth - ZigBee hybrid networks

•

NFC (RFID) applications with 3G/GPRS

•

ZigBee - WiFi hybrid networks

Summary of Contents for Waspmote












































































































































































Search results

Summary of Contents for Waspmote

Reviews:

Related manuals for Waspmote

Brands by name

Popular brands

Libelium Waspmote, Technical Manual

Search results

Summary of Contents for Waspmote

Reviews:

Related manuals for Waspmote

Brands by name

Popular brands