Libelium Waspmote Technical Manual Download

Page: 33 / 171

-33-

v6.3

Waspmote Plug & Sense! - Encapsulated Line

Sensor sockets are configured as shown in the figure below.

Sensor

Socket

Sensor probes allowed for each sensor socket

Parameter

Reference

Temperature

9203

Soil temperature

86949*

Ultrasound (distance measurement)

9246

Humidity

9204

Ultrasound (distance measurement)

9246

Luminosity (LDR)

9205

Noise sensor (dBA)

9259

Linear displacement

9319

* Ask Libelium

Sales Department

for more information.

Figure: Sensor sockets configuration for Smart Cities model

As we see in the figure below, thanks to the directionable probe, the ultrasound sensor probe may be placed in different

positions. The sensor can be focused directly to the point we want to measure.

Figure: Configurations of the ultrasound sensor probe

Note:

For more technical information about each sensor probe go to the

Development section

in Libelium website.

Summary of Contents for Waspmote












































































































































































Search results

Summary of Contents for Waspmote

Reviews:

Related manuals for Waspmote

Brands by name

Popular brands

Libelium Waspmote, Technical Manual

Search results

Summary of Contents for Waspmote

Reviews:

Related manuals for Waspmote

Brands by name

Popular brands