Libelium Waspmote, Technical Manual

Page: 23 / 171

-23- v6.3
Waspmote Plug & Sense! - Encapsulated Line
Sensor sockets are configured as shown in the figure below.
Sensor
Socket
Sensor probes allowed for each sensor socket
Parameter Reference
A, B, C and F
Carbon Monoxide (CO) [Calibrated] 9371-P
Carbon Dioxide (CO
2
) [Calibrated] 9372-P
Oxygen (O
2
) [Calibrated] 9373-P
Ozone (O
3
) [Calibrated] 9374-P
Nitric Oxide (NO) [Calibrated] 9375-P
Nitric Dioxide (NO
2
) [Calibrated] 9376-P
Sulfur Dioxide (SO
2
) [Calibrated] 9377-P
Ammonia (NH
3
) [Calibrated] 9378-P
Methane (CH
4
) and Combustible Gas [Calibrated] 9379-P
Hydrogen (H
2
) [Calibrated] 9380-P
Hydrogen Sulfide (H
2
S) [Calibrated] 9381-P
Hydrogen Chloride (HCl) [Calibrated] 9382-P
Phosphine (PH
3
) [Calibrated] 9384-P
Ethylene (ETO) [Calibrated] 9385-P
Chlorine (Cl
2
) [Calibrated] 9386-P
D Particle Matter (PM1 / PM2.5 / PM10) - Dust 9387-P
E Temperature, Humidity and Pressure 9370-P
Figure: Sensor sockets configuration for Smart Environment PRO model
Note:
For more technical information about each sensor probe go to the Development section in Libelium website.