– 35 –
The oven sensor has a resistance of
1100 Ω
at room temperature and
2650 Ω
at clean
temperature.
The outlet and wiring can then be pulled down
from the oven wall approximately 1½ inches.
Note:
When replacing the meat probe outlet, cut
the probe wires and splice the new probe using
approved heat resistant connectors.
(
Continued next page
)
Remove the two ¼-in. hex-head screws that
hold the sensor to the rear wall of the oven
cavity.
5.
Meat Probe Outlet
The meat probe outlet is located near the top left
corner of the oven cavity. To access the probe,
open the oven door and remove the 2 Phillips-
head screws that secure the probe outlet to the
oven.
Oven Temperature Sensor
To remove the temperature sensor:
Remove the oven door. (See
Oven Door
Removal
.)
Remove the range from the installation.
Remove the two ¼-in. hex-head screws that
attach the wiring cover to the rear of the
range.
1.
2.
3.
Disconnect the sensor wire harness.
4.
