![background image](http://html.mh-extra.com/html/lg/lrg30355sb-30in-gas-range/lrg30355sb-30in-gas-range_technical-service-manual_218344031.webp)
– 31 –
Note
: When reinstalling the bake burner, be sure
the orifice hood is inserted into the burner inlet
opening.
6. Remove the hex-head screw that holds the
front of the burner in place.
7. Remove the 2 hex-head screws, located
behind the warming drawer, that hold the
burner in place and remove the burner.
4. Remove the 2 hex-head screws that hold the
glow-bar igniter to the bake burner.
5. Disconnect the glow-bar igniter wires located
behind the warming drawer. Gently pull the
connector through the oven floor and remove
the glow-bar igniter from the oven.
Bake Burner and Glow-bar Igniter
To remove the bake burner glow-bar igniter:
1. Remove the oven door (See
Oven Door
.
)
2. Remove the warming drawer (See
Warming
Drawer
.
)
3. Remove the bottom pan by removing 2
screws, lifting the back of the pan, and sliding
the pan back until it can be removed from the
oven.