Operation and settings
15
> GOP size: It means “Group of Pictures”. The higher the GOP, the
better is the video quality of the camera. Edit the value of GOP
from 1 to 30. This setting is valid for H.264 video format only.
>
Quality: Select the Quality.
-
VBR: The bit rate may vary depending on the complexity of
the video to meet the selected quality.
-
CBR: The video quality may vary in order to preserve a
constant bit rate.
> Stream quality: If the [Quality] option set to VBR, this option is
displayed. Select the stream quality from the drop down box, the
camera supports five types. (Highest, High, Medium, Low and
Lowest)
> Bitrate: If the [Quality] option set to CBR, this option is displayed.
Edit the bit rate value from 256 kbps to 10 240 kbps.
Note:
If the ‘Bit rate’ is configured too low with high resolution, the
actual frame rate will decrease because of narrow bandwidth. So
you need to set or change the ‘Bit rate’ to high value.
>
Smart Codec: You can improve the image of specific area to
configure the Region. If you select the [Region] option, the
[Smart Codec (Region)] window is activated.
Note :
• When the video codec is H.264 or H.264_HIGH, the Smart
Codec can be selected.
•
Two areas can overlap and the sum of the two areas have to
be less than 30 % of the total area.
JPEG Snapshot Quality
> Snapshot Quality: Select the quality of JPEG snapshot.
• Save: Click this button to confirm the settings.
Network settings
Basic
General
> MAC address: Displays the MAC address.
Port & Encryption
> Network encryption: Select the HTTP or HTTPS option for
security.
> Smart Port Setting: Select [On] to allocate a port number
automatically.
Note:
If you select [On], [UPNP Status], [External IP], [Web Port] and
[RTSP Port] options are deactivated.
> UPNP Status: When you use the router that is supported UPNP
function, you can set the port forwarding automatically by using
the [Smart Port Setting]. [UPNP Status] shows connected
status of router.
>
External IP: When you connect the router that is supported
UPNP function, this option is displayed. Displays the external IP
address allocated router.
> Web port: The default HTTP port number (80) can be changed to
any port within the range 1 025 to 65 535.
> RTSP port: Check RTSP port. The default port is 554. Other ports
can be selected within the range 1 025 to 65 535.
Note:
The RTSP port number should not be same with the web port
number.
ARP Ping
> Enable ARP Ping to configure IP address: Check to enable ARP
ping.
• Save: Click this button to confirm the settings.
Summary of Contents for LND3230R
Page 27: ......
