LG LE2104 Owner'S Manual Download

Page: 14 / 72

Connections and settings

Connecting LKD1000 controller

Connecting the LKD1000 controller to control the DVR.
(Refer to the manuals of the LKD1000 controller for more
details.).

TX+

TX-

LKD1000

Controller

Rear of the DVR

Notes:

Do not connect a PTZ camera with LKD1000 controller
to the D1 or D2 port. It may cause a malfunction.

The MAIN and SPOT buttons of the LKD1000 controller
are not activated for LE2104/LE2104D models.

Connecting Alarm Input and Alarm
Output

Alarm terminals are used to connect the alarm devices such
as sensors, door switches, etc.

Alarm Input

You can connect up to 4 alarm sensors.
Each alarm sensor should be connected with G (GND). The
signal state is adjustable to N/O (Normal Open) or N/C
(Normal Close) through the setup menu.

•

Alarm sensor

Rear of the DVR

Alarm sensor

Terminal No.

Description

Alarm Input 1

Alarm Input 2

Alarm Input 3

Alarm Input 4

Ground

Alarm Output

Connect the alarm device to the alarm output.

Alarm signal

output at an event occurrence.

Rear of the DVR

Terminal No.

Description

Alarm Output 1

Ground

Note:

The internal switching relays are rated for 0.3A at 125V AC
or 1A at 30V DC. If the electric current is higher than that
the unit can be damaged.

Summary of Contents for LE2104









































































Search results

Summary of Contents for LE2104

Reviews:

Related manuals for LE2104

Brands by name

Popular brands

LG LE2104, Owner'S Manual

Search results

Summary of Contents for LE2104

Reviews:

Related manuals for LE2104

Brands by name

Popular brands