12
Connections and settings
Connecting Camera
Connect cameras to the unit using 75-ohm video coaxial
cables with BNC connectors. There are two BNC connectors
for each camera. Either connector can receive a camera’s
signal. This signal is looped-through (directly connected)
to the other connector, so that you can send the camera’s
signal to other equipment.
Connecting Display device
Make one of the following connections, depending on the
capabilities of your existing equipment.
The LE2104/LE2104D models without TV/VGA output select
switch can be outputted simultaneously from the VGA and
MAIN OUT jack. On other LE2104/LE2104D models with
TV/VGA output select switch, main monitor type should be
selected to display the main screen.
CCTV(Composite Video Type) Monitor con-
nection
When using the analog TV monitor, set the Video
Output mode select switch to TV position.
Connect the unit to the monitors via 75-ohm video
coaxial cables with BNC connectors.
VGA Monitor connection
When using the VGA monitor, set the Video Output
mode select switch to VGA position.
Connect the VGA jacks on the rear of the unit to the
corresponding input jacks on the TV or monitor using
the VGA cable.
Connecting Audio device
Connect the AUDIO OUT jacks on the unit to the mono
audio in jacks on your audio device.
Connecting USB device
