36
Connections and settings
User
You can register a new user with various access rights to the
DVR or client program.
Number: Select the number to add new user ID or
change the user ID, user level or password.
ID: Enter the new user ID using the virtual keyboard.
Level: Select the level of the new user.
Password: Enter or change the password for the user
using the virtual keyboard. You can use the password
with number, special character or characters. (Minimum
4 length, Maximum 8 length).
Note:
Remember the password. If you forget the password please
contact an authorized service center or the store where you
purchased the system.
•
•
•
•
Update
The update feature allows you to upgrade DVR software
and add/upgrade PTZ protocols. In this case, the current
DVR settings are not deleted or replaced during the update
process.
1. Select one of the following:
Select SYSTEM S/W to upgrade DVR system soft-
ware.
Select PTZ PROTOCOL to update the DVR protocols.
2. Choose the media from which to perform the update:
USB: Select USB, and then insert the USB drive into
the DVR. All USB devices must be disconnected
before you can use the USB drive.
NETWORK: Select NETWORK, and then do following:
1) Select the update server settings box. The vir-
tual keyboard is displayed.
2) Enter the update server IP address. The DVR net-
work settings must be configured and you must
know the update server’s IP address.
3. Select [Update] and press ENTER to start the update
process.
4. Select [OK] and press ENTER to begin the update pro-
cess or select [Cancel] to stop and exit. After the update
process is completed, the system displays the dialogue
box for system restarting.
5. Select [OK] and press ENTER to restart the DVR.
Note:
You should install one of the formatted HDD for update. If
you do not install the HDD, the update will not work prop-
erly.
•
•
•
•
