125
INFORMATION
Before reporting a problem, check the following:
If the following symptoms occur, please carry out the checks and adjustments described
below. There may be no malfunction.
General
Problem
Solution
Cannot view certain
programs.
•
Adjust the location or orientation of the antenna.
•
Save the programmes you wish to view later using
Auto Tuning
or
Channel Edit
.
There is a delay after the
Laser TV is switched on
before the image is fully
visible.
•
This is not a problem. Image noise that may occur
when the Laser TV is first switched is being cleaned
up.
Picture
SMART
→
Settings
→
SUPPORT
→
Picture Test
First run a Picture Test to verify that the image signal output is normal.
If there is no problem with the test image, check external device connections and
broadcast signals.
Problem
Solution
Images from previous
program or other
programs linger or the
screen displays annoying
lines.
•
Adjust the orientation of the antenna to the TV
transmitter, or refer to the manual for instructions on
connecting the antenna.
Vibrating horizontal/
vertical lines and
fishnet patterns appear
momentarily.
•
Such a problem may happen when there is strong
electronic interference. Turn off other electronic
devices such as mobile phones, power tools, and
other small electrical appliances.
The screen display freezes
or does not work properly
during a digital broadcast.
•
This may occur in case of a weak signal or unstable
reception. Adjust the antenna orientation and cable
connections.
•
If the signal strength or quality is low on
Manual
Tuning
, check with the TV station or administration
office.
Summary of Contents for HECTO2
Page 31: ...31 SETTING UP THE TV ...
Page 132: ......
