35
SETTING UP THE TV
Using the Edge Adj Function
Edge Adj
adjusts the right, left, top, and bottom width of the projected image if the
projected image and screen are not perpendicular to each other due to a tilted screen or
TV.
Because the
Edge Adj
function may cause inferior screen image quality, use this fuction
only when it is not possible to set up the Laser TV at an optimal angle.
1
Go to
SMART
→
Settings
→
OPTION
→
Edge Adj
.
2
Move to a point you want to adjust using the , , ,
(Up, Down, Left, or Right)
button of the Magic Remote Control and select the point by pressing the
Wheel
(OK)
.
3
The four-way arrows , , ,
(Up, Down, Left, or Right)
are shown around the
selected point.
4
The vertical and horizontal value of the point can be changed by pressing
the , , ,
(Up, Down, Left, or Right)
buttons of the magic remote control.
5
Adjust the value of the point to the desired value and complete the adjustment by
pressing the
Wheel (OK)
button of the magic remote control.
– The vertical and horizontal value of each point is changed by 5 in
Tuning
mode, and
by 1 in
Fine Tuning
mode.
6
After all adjustments have been made, close the
Edge Adj
function by pressing
the
BACK
button.
Summary of Contents for HECTO2
Page 31: ...31 SETTING UP THE TV ...
Page 132: ......
