25
MAGIC REMOTE CONTROL
MAGIC REMOTE CONTROL
If the battery low message appears while using the Laser TV,
replace the batteries.
As shown in the figure, press the top of the battery cover and
slide it down the cover. Insert two new and identical batteries
(1.5 V, AA type) with + and - poles pointing in the correct
direction in the remote control.
1
2
•
Do not mix new batteries with old ones.
NOTE
CH
VOL
BACK
SMART
/
Q.MENU
Pointer Signal
Transmitter
(POWER)
Turns the Laser TV on or off.
(Up/Down/Left/Right)
BACK
Press this button during menu selection to return to the
previous step.
SMART
Displays the Home menu.
Wheel (OK)
Select a menu or option. If you press the
button while the pointer is moving, the pointer
disappears and the magic remote control operates as
a normal remote control.
To display the pointer on the screen, shake the magic
remote control to the left/right.
(Voice recognition)
Check the network connection before using the voice
recognition function.
1. Press the voice recognition button.
2. Speak your request when the voice display bar on
the left of the Laser TV screen is activated. Use the
magic remote control no further than 10 cm from
your face. The voice search may fail if you speak
too quickly or too slowly. The recognition rate may
vary depending on the user’s characteristics (voice
volume, pronunciation, intonation, and speed) and
the environment (noise and Laser TV volume).
Summary of Contents for HECTO2
Page 31: ...31 SETTING UP THE TV ...
Page 132: ......
