9. Additional functions
- 106 -
Vacuum mode
9. Additional functions
If you need vacuum after service at the product installation site, when you set vacuum mode func-
tion, all valves and EEV are open.
1. Turn on Cycle Main PCB Dip S/W No. 4.
2. Press SW02C button to check Suc in Segment window.
1
2
3
4
5
6
7
8
3. Press SW01D button 1 time.
4. Press SW02C button to check Se3 in Segment window.
5. Press SW01D button 1 time.
6. Vacuum mode setting is completed.
h
It is cleared when you reset the power.
Dip S/W
Segment
SW01D SW01C SW02C SW03C
