34
How to Set E.S.P?
Set the ESP value using
F G
button.
Select a fan speed again using
F G
button, and set the ESP value for each speed.
Press
K
button to save the setting.
Press
L
button to exit.
h
If no button is selected for about 25 seconds after setup, it exits the setup mode automatically.
h
If the
K
button is not selected before you exit, the changes will not apply.
(The ESP value can be set from 1 up to 255,
and 1 is the smallest value and 255 is the largest value.)
Ex) 120 set for Breeze
Ex) 230 set for High
(ESP value for Breeze : 120)
(ESP value for High : 230)
• Pay special attention not to mix the ESP values for each speed.
• Some product may not allow you to program for Breeze and Power speed.
• The programmable ESP value may vary according to the product and capacity.
• When a power failure compensation is completed after power is on (at least 1 minute),
Please set or check the ESP value.
1,MFL67939921,영영 2018. 8. 2. 영영 1:41 Page 34
