30
Optional Operation
Installer Setting-Dry Contact Mode Setting
This function is available only for the products with dry contact device.
Press and hold
B
button for more than 3 seconds to enter the installer settings mode.
- If pressing only once briefly, it will enter the user settings mode.
Make sure to press and hold for more than 3 seconds.
Move to the Dry Contact Mode Settings in the menu using
B
button and
then it displays as below.
Select the Dry Contact Mode using
F G
button.
Press
K
button to save the setting.
Press
L
button to exit.
h
If no button is selected for about 25 seconds after setup, it exits the setup mode automatically.
h
If the
K
button is not selected before you exit, the changes will not apply.
Code value for
dry contact
Set value
❈
Set value for dry contact
00 : Manual
01 : Auto
• See the Dry Contact manual for more detailed functions about dry contact mode.
▶
What is Dry Contact?
It means a contact signal received when an air conditioner runs interlocking with hotel key card
or sensor.
1,MFL67939921,영영 2018. 8. 2. 영영 1:41 Page 30
