Installation Manual
29
ENGLISH
Optional Operation
Installer Setting-Remote Controller Master/Slave Setup
This function is the settings when controlling 2-remote controls or group control.
Press and hold
B
button for more than 3 seconds to enter the installer settings mode.
- If pressing only once briefly, it will enter the user settings mode.
Make sure to press and hold for more than 3 seconds.
Move to the Master/slave selection in the menu using
B
button and
then it displays as below.
Select the remote control master/slave using
F G
button.
Press
K
button to save the setting.
Press
L
button to exit.
h
If no button is selected for about 25 seconds after setup, it exits the setup mode automatically.
h
If the
K
button is not selected before you exit, the changes will not apply.
Code value for remote
control master/slave
Set value
❈
Set value for remote control
00 : Slave
01 : Master
Remote control
Function
01
Master
The Indoor Unit run by master remote controller in case of group con-
trol. (Set as a master by default)
02
Slave
Set all the remote controllers as slaves except one master remote
control for group control.
• Some functions may not be available during a group control except basic operation settings,
fan speed low/med/high, remote control lock setting, time setting.
h
See the ‘Group control’ section for more information about master/slave.
1,MFL67939921,영영 2018. 8. 2. 영영 1:41 Page 29