68
206-4292 Draft A.2
IP Environment Setup (Cont.)
(Continued from previous page)
IP Con
fi
guration
Note:
If the server IP address and port number or domain name have already been set in the
EZ-Manager Wizard, the speci
fi
ed data will be re
fl
ected in the
fi
elds displayed.
Note:
Setting the Media Type to “IP” automatically sets item 119 DATA CHANNEL in the Installer
Menu to 253. You cannot alter this setting unless you revert Media Type to “RF.” Also, it is not
possible to direct enter “253” in the Installer Menu.
a) The IP Input Type
fi
eld provides the option to specify the domain name of the Pro:Centric server
instead of the server’s IP address and port number. Select/highlight the
IP Input Type
fi
eld and
press
OK
on the Installer Remote to display the drop-down list of options. Then, use the Up/
Down arrow keys to select the desired option—Number or Domain—for de
fi
ning the server.
b) Depending on your selection in the previous step, either:
• Enter the Pro:Centric server IP address and port number in the IP Address and Port Number
fi
elds, respectively. The IP address must match the IPv4 multicast address and the port
number must match the port number that is set in the Pro:Centric server.
• Enter the Pro:Centric server domain name in the Domain Name
fi
eld. Note that in order for
the domain name to be resolved to an IP address, there must be a DNS entry for the domain
name.
For each data entry
fi
eld: Use the arrow keys to select the
fi
eld and press
OK
. Then, you can
either use the number keys on the Installer Remote to direct enter data values, or you can use
the arrow keys to select the appropriate number(s)/alphanumeric character(s) from the pop-up
virtual keyboard displayed at the bottom of the screen. When you are done, select
Enter
from
the virtual keyboard, and then press
OK
on the Installer Remote.
Pro:Centric Application Mode Con
fi
guration
Select/highlight the
Mode
fi
eld and and press
OK
on the Installer Remote to display the drop-down
list of options. Then, use the Up/Down arrow keys to select the appropriate Pro:Centric Application
Mode setting—
Con
fi
guration Only
,
FLASH
,
GEM
, or
HTML
. If the Pro:Centric Application Mode
is set to “Con
fi
guration Only,” Pro:Centric application data will not be downloaded.
Note:
If the mode has already been set in the Installer Menu (item 098 PRO:CENTRIC) or in the
EZ-Manager Wizard, the speci
fi
ed mode will be re
fl
ected in this
fi
eld. If you change the mode in
this menu, Installer Menu item 098 will now re
fl
ect the value you selected here.
3. Select/specify the appropriate Update Event setting(s), as required. Based on Update Time
settings, the Wake For Update feature wakes the TV once daily to check for, and if applicable,
download updates from the Pro:Centric server. See Installer Menu item 121 UPDATE TIME HR
description on page 35 for additional information on Wake For Update functionality.
• To toggle between ON and OFF in this menu, select/highlight the
Update Event
fi
eld and press
OK
on the Installer Remote. When Update Event is set to “ON,” an Update Time
fi
eld is displayed.
• If Update Event is ON, set the Update Time as required. Use the arrow keys on the Installer
Remote to select/highlight the Update Time
fi
eld, and then press
OK
. Hour, Minute, and
Meridiem
fi
elds will be displayed. Select each
fi
eld in turn and specify the appropriate Wake
For Update time, as desired. Note that the Update Time set in this menu is based on a 12-hour
clock. Ensure the meridiem (AM/PM) speci
fi
cation is set accordingly.
4. Once all
fi
elds are completed as required, use the arrow keys on the Installer Remote to return to
the IP Environment Menu, as necessary, or press to exit the IP Environment Menu.
