LG 43LX770M Commercial Mode Setup Manual Download Page 54

Page: 54 / 103

206-4292 Draft A.2

Cloning Procedures (Cont.)

Import Clone File Procedure

1. Turn ON the Target TV.
2. The next step depends on whether the LG Setup Wizard appears on the screen when you turn

ON the TV:
• If the wizard is displayed, you can complete the import procedure via the EZ-Manager Wizard,

as indicated above (see “Before You Begin”). However, to continue with this procedure and
access the “Import Clone File” option from the TV menus, exit the Setup Wizard. Then, continue
with step 3.

• If the wizard is not displayed, go directly to step 3.

3. If applicable (see also “Before You Begin” above), make sure to assign the appropriate Zone

designation(s) in the Target TV at this time.

Note: In order for the proper location-speci

c TV Zone and/or Wi-Fi Zone pro

data to be applied, the Zone designation(s) must be assigned in the Target TV(s)
BEFORE importing is initiated.

4. Insert the USB memory device with the Clone/Con

guration (.tlx)

le into either of the USB

ports on the Target TV.

5. Press

MENU

on the Installer Remote to display the TV setup menus (TV is in Pass-through

Mode) or the Function Menu (TV is already in FTG Mode).

6. (TV in Pass-through Mode only) From the Quick Settings Menu displayed at the right of the

screen, select the

Advanced

menu icon and press

to access the advanced TV setup

menus.

7. Use the arrow navigation keys to select/highlight either the

General

menu icon from the TV

setup menus or the

Safety

menu icon from the Function Menu. Then, press the number “

” key

a total of seven times to access the TV Manager.

Note:

Ez Download is always selected by default when you initially access the TV Manager.

Also note that Diagnostics is for service use only.

Select the ﬁ le(s) to download, and then select UPDATE below.

Logo Image Download

Splash Image ProC.jpg

Update TV Software

LX770M_CPU_SW.epk

Update PTC Software

LX770M_PTC_SW.txt

Import Clone File

LX770M_IM.tlx

UPDATE

USB DEVICE

EXIT

Splash Image ProC.jpg

Splash Image 2.jpg

TV MANAGER

USB 1:

Device Name

Ez Download

Logo Image Download

Update TV Software

Update PTC Software

Import Clone File

Diagnostics

(Continued on next page)

Summary of Contents for 43LX770M








































































































Search results

Summary of Contents for 43LX770M

Reviews:

Related manuals for 43LX770M

Brands by name

Popular brands

LG 43LX770M, Commercial Mode Setup Manual

Search results

Summary of Contents for 43LX770M

Reviews:

Related manuals for 43LX770M

Brands by name

Popular brands