30
206-4292 Draft A.2
Express Script (Cont.)
(Continued from previous page)
7. As the
fi
nal step of the Express Script, the TV saves your settings and uses the channel/Aux
input lineup to create an FTG Channel Map before con
fi
guring the TV for FTG Mode via CPU
(see also notes below). When you are ready to proceed, select
FINISH
, and then press
OK
.
EZ-MANAGER CONFIGURATION COMPLETE
Installed Components
Pro:Centric Application
GEM application downloaded
Maintenance Files
LYH_Confi g.tlx
TURN OFF
REBOOT
COMPLETE THE EXPRESS SCRIPT
Saving data...
50%
This step uses the auto-tuned/edited channel lineup to create an FTG Channel Map and configure the TV’s CPU
for FTG operation.
If you did not run Auto Tuning, no digital or analog channels will be included in the FTG Channel Map upon
completion of this step. In this case, only the Aux inputs from the channel lineup will be included in the FTG Channel
Map.
Select FINISH to complete the Express Script.
08
BACK
FINISH
EXIT
Con
fi
guration progress will be shown at the bottom of the screen. When this step is complete, the
Express Script exits, and the TV tunes to the
fi
rst channel in the FTG Channel Map.
If desired, the TV Setup created from the Express Script may also be saved to a USB memory
device and used for cloning purposes (see “Cloning Procedures” on pages 50 to 56 for further
information).
Note:
Aux inputs (if enabled) will appear between the highest analog and lowest digital channel
number in the FTG Channel Map when Channel Up/Down is used on the Installer Remote.
Note:
If you did not run Auto Tuning and all Aux inputs are disabled, an FTG Channel Map will
NOT be created and the TV will not be con
fi
gured for FTG Mode via CPU.
Note:
If required, you can set up/modify channel banks at a later time using LG’s FTG File
Manager. See “Channel Banks Overview” below for further information.
Channel Banks Overview
Channel Banks enable institution administrators to create tiered channel programming on patient
in-room TVs. Each channel bank may offer a custom channel lineup for a pre-determined fee.
The Express Script enables you to configure four channel banks (1, 2, 3, and 4) for the channel
lineup (see step 5). The top tier generally contains the most programming (premium, etc.), 2nd
tier = lesser programming, 3rd tier = basic programming, etc. It is also possible to create an
Inactive TV display with Channel Bank 4, so that an “Inactive TV Call Attendant” message appears
when the TV is turned ON. In this case, an administrator can then select another channel bank on
the patient’s in-room TV depending on the programming tier requested by the patient.
All channels found during Auto Tuning automatically are added to and active in all four channel
banks. See “Channel Attributes and Channel Bank Allocation” below for further information.
