LG 32SE3D, Owner'S Manual

Page: 73 / 135

19
POL
ENGLISH
Configuration Setup
This feature enables a detailed configuration of the product.
Splash Offset Time
y y
This feature controls the amount of time a splash image is displayed.
y y
You can select a time between 0 and 10 seconds.
USB Auto Playback
y y
This is a feature that automatically plays video or photo files from your USB storage device.
y y
This feature is activated when you connect a USB device to your monitor or when you turn on your monitor
with a USB device connected to it.
y y
Video and photo files must be located in the root folder, in the first partition of your USB storage device.
y y
Video or photo files located here will play back repeatedly.
NOTE
y y
Contents stored on the USB storage device connected to USB 1 are played back if USB storage devices are
connected to both USB 1 and USB 2.
15 Min Auto Off
y y
Set whether to use 15 Min Force Off.
y y
This feature can be set to On or Off.
y y
On: If there is no signal for 15 minutes, the product turns off.
y y
Off: 15 Min Force Off is disabled.
y y
It is recommended that you set this feature to Off if you intend to use the product for long periods of time.
Automatic Standby
y y
Set whether to use 4 Hours Off.
y y
This feature can be set to On or Off.
y y
If you set this feature to On, the product turns off if there is no input from the remote control for 4 hours.
y y
If you set this feature to Off, 4 Hours Off is disabled.
y y
It is recommended that you set this feature to Off if you intend to use the product for long periods of time.
Screen Saver Cube
y y
This Screen Saver feature lets you enable/disable the 360-degree-rotating LG Cube which appears on the
screen when there is no signal.
Configuration Setup
Splash Offset Time
USB Auto Playback
15Min Auto Off
Automatic Standby
Screen Saver Cube
Disable
Off
Off
Yes
+0 sec
OK
Previous
LG Digital Signage Setup
USB Cloning
Password Change
Set ID Setup
Configuration Setup
Lock Mode
External Speaker
Fail Over
ISM Method
Easy Brightness Control
S/W : xx.xx.xx.xx Micom : x.xx.x OK
Installation Menu (V 3.0)
Configuration Setup