LG 32SE3D Owner'S Manual Download Page 19

Page: 19 / 135

ENGLISH

Precautions For Moving the Product

WARNING

•

Make sure to turn off the product.

- You may be electrocuted or the product can be damaged.

•

Make sure to remove all cables before moving the product.

- You may be electrocuted or the product can be damaged.

•

Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged

product can cause electric shock or fire. Contact an authorized the service center for repair.

•

Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to

carry larger apparatus. Do not press against or put stress on the front panel of the apparatus.

CAUTION

•

Do not shock the product when moving it.

- You may be electrocuted or the product can be damaged.

•

Do not dispose the product-packing box. Use it when you move.

Summary of Contents for 32SE3D








































































































































Search results

Summary of Contents for 32SE3D

Reviews:

Related manuals for 32SE3D

Brands by name

Popular brands

LG 32SE3D, Owner'S Manual

Search results

Summary of Contents for 32SE3D

Reviews:

Related manuals for 32SE3D

Brands by name

Popular brands