LG 32SE3D, Owner'S Manual

Page: 60 / 135

6
POL
ENGLISH
Power On Default (Input Source, Video Setting, Aspect Ratio)
y y
You can configure 'Input Source', 'A/V Setting', and 'Aspect Ratio' after the monitor is turned on.
y y
You can set this feature to Yes (enabled) or No (disabled).
y y
If you set 'Power On Default' to No, the settings for 'Input Source', 'A/V Setting', and 'Aspect Ratio' are not
applied.
y y
If you set 'Power On Default' to Yes, the settings for the menus above are applied.
(This feature may not be available with some models.)
Input Source
y y
This feature allows you to set whether to use a new input source or a pre-existing input source.
y y
Set 'Input Source' to Off to use the pre-existing input source.
y y
You can use any of the sources supported by the given model as the input source.
y y
If both 'Input Source' and 'On Time' have been set, 'Input Source' takes priority.
(This feature may not be available with some models.)
A/V Settings
y y
When your monitor is powered on, you can set certain video options.
y y
If you set this feature to Yes, the video settings configured before entering the Installation Menu are saved. In
addition, even if you changed the video settings before turning off the monitor, the saved settings are restored
when you turn the monitor on again.
y y
Saves video settings: Picture Mode, DPM Select, Smart Energy Saving, Backlight, Contrast, Brightness, Sharp-
ness, Color, Tint, and Color Temp.
y y
Saves audio settings: Sound Mode and Balance.
(This feature may not be available with some models.)
Aspect Ratio
y y
This feature allows you to set the screen aspect ratio applied to your monitor when turned on.
y y
Selecting 'Disable' sets the screen aspect ratio to 'Aspect Ratio' when the monitor is turned on.
y y
Selecting 'Set By Program' sets the screen aspect ratio to 'Set By Program' when the monitor is turned on.
y y
Selecting '4:3' sets the screen aspect ratio to '4:3' when the monitor is turned on.
y y
Selecting'16:9' sets the screen aspect ratio to '16:9' when the monitor is turned on.
(This feature may not be available with some models.)
Menu Display
y y
Setting this feature to Yes will display the menu. Setting this feature to No will hide the menu.
y y
However, even if you have set this feature to No, you can easily open the Installation Menu by pressing and
holding the Menu button for more than 5 seconds.
(This feature may not be available with some models.)
OSD Display
y y
Enable or disable OSDs by setting this feature to Yes (displayed) or No (not displayed).
y y
If you set this feature to No (not displayed), OSDs other than Installation Menu are not displayed.
(This feature may not be available with some models.)