LG 32SE3D, Owner'S Manual

Page: 63 / 135

9
POL
ENGLISH
Sync Mode
y y
This feature allows you to sync the start times of contents (videos or images that have been distributed by
SuperSign Software) played back on the Master and Slave monitors.
y y
If you set Sync Mode to Off, the sync feature is disabled.
y y
A Slave monitor plays contents at the same time as the Master monitor.
y y
While Sync Mode is performed, RS-232C control of other commands may not work.
(This feature may not be available with some models.)
Sync Mode
(Only for SE3C models.)
y y
The Sync feature is used to start playing content (video or image) distributed by Elite-W across multiple
monitors connected via RS-232C at the same time.
y y
If set to Off, the Sync feature is disabled.
y y
If set to Master for a monitor, the monitor is set as the reference monitor.
y y
If set to Slave for a monitor, the monitor plays content at the same time as the Master monitor.
DPM Wakeup Control
y y
This feature sets conditions for releasing the DPM status according to the DVI/HDMI's processing of digital
signals.
y y
Clock: Checks the clock signal of the digital signal and, if the clock signal exists, releases the DPM status.
y y
Sync: Releases the DPM status when both the clock signal and data of the digital signal are entered.
Still Image Detecting
y y
This feature detects still images.
y y
If you set this feature to Yes, you can use the RS-232C command for detecting still images.
PM Mode
y y
This feature activates some of the monitor's functions after it enters Off status, allowing the monitor to remain
practically the same as when it is turned on.
y y
Power Off: All functions remain turned off except some functions (Power, Time, etc.) when the monitor turns
off. (Extended Display Identification Data (EDID) may be sustained depending on the input and
model.)
y y
Sustain Aspect Ratio: Sustains Extended Display Identification Data (EDID) even when the monitor is turned off.
y y
Screen Off: Only turns off the screen and audio when the monitor enters Auto Off/Automatic Standby/DPM.
Network-based control is possible.
y y
Screen Off Always: Has the same function as PM Mode's Screen Off. Entering and releasing the Screen Off status
using a remote control is also possible.