Installation and Operation Manual
49
To erase Wake-Up:
LWS-BS station
1.
Press the
[Menu]
button.
2.
Dial 5 4.
3.
Select “OFF”.
4.
Press
[Save]
button.
Conditions
1.
The Wake-up alarm Ring signal is 30 seconds, On/90 seconds, Off (3 times). If no action is
taken by the user, the ring signal is given to the Attendant with a display designating the station
number that did not respond.
2.
Time (hh:mm) must be entered in the Military 24-hour format.
3.
The
daily alarm will reset and repeat each day until erased (cancelled)‟ the One-time alarm will
reset and cancel automatically.
3.17 Intercom Call (ICM Call)
Description
A non-blocking ICM is available to all stations in the system. Users may place an intercom call to other
stations in the system by dialing applicable digits as defined in the system Numbering Plan.
Operation
To place an intercom call:
LWS-BS station and LWS-WK
1.
Lift the handset or press the
[Speaker]
button to receive ICM dial tone.
2.
Dial station number or press the
{Station}
button.
3.
For ring-back tone, await answer.
GDC-400H/450H
1.
Press (
[Talk]
key) to receive ICM dial tone.
2.
Dial station number.
3.
For ring-back tone, await answer.
Conditions
1.
Intercom Dial tone will time-out if action is not taken within Dial-Tone Time or, if the time between
digits exceeds the Inter-digit Timer; error tone is received on dial tone time-out.
2.
ICM Dial tone is halted after dialing the first digit.
3.
If the called station is busy, Intercom Busy tone is provided for the Busy Tone time (7 sec.) then,
Error tone is sent by the system; the caller may disconnect or activate a feature such as Message
Wait/Callback.
