Installation and Operation Manual
26
2.11.1.3 Registering LWS-WK to the LWS-BS
To register to the LWS-BS, below procedure is performed on the LWS-WK.
1. Press
[Menu]
button to display the menu.
2. Highlight
[Phone Register]
using the Navigation up/down key, and then press
[OK]
soft button or
Navigation
„OK‟ key.
3. Select
[Subscription]
using the Navigation up/down key, and then press
[OK]
soft button or
Navigation
„OK‟ key.
4. Display
[Searching..1]
.
5. The system
[RFPI :
eg. 01234567890123
]
will be displayed when a system is found.
6. The RFPI of your system is available from your System Administrator, or perhaps the attendant.
7. Press
[OK]
soft button or
„Navigation „OK‟ key. In a few seconds, a confirmation tone is received at
the LWS-WK.
8. If the registration fails, repeat procedure from Step 1 to 7 at the LWS-BS and Step 1 to 6 from the
LWS-WK.
2.11.2 Terminating a Registration
To terminate a subscription, below procedure should be performed on the LWS-BS;
1. Press
[Menu]
button.
2. Press
[Digit 1]
(CONFIGURATION submenu), or Select
[1. CONFIGURATION]
using Navigation
up/down key and
[OK]
Button.
3. Press
[Digit 4]
(STATION REGISTRATION sub menu), or Select
[4. STATION REGISTRATION]
using Navigation up/down key and
[OK]
Button.
4. Press
[Digit 2]
(DEREGISTER STATION submenu), or Select
[2. DEREGISTER STATION]
using
Navigation up/down key and
[OK]
Button.
5. Select the phone number using Navigation left/right key (S101~S107)
6. Press Navigation
[OK]
button or
[OK]
soft key.
7. When the subscription is complete below message is shown on LWS-BS LCD
STATION : 10X
UNSUBSCRIBED : SUCCESS
DEREGISTER
: To erase registration information of both LWS-BS and Wireless terminals (LWS-
WK and GDC-400H/450H handsets).
FORCED ERASE
: To erase registration information of the relevant Wireless terminal. (e.g. in
case that the terminal is missing or non-functional)).
In this case, the
registration information will be kept on the terminal itself.
All Data ERASE
: To erase registration information of all wireless terminals.
In this case, the
registration information will be kept on the terminals themselves.
Note:
