LG-Ericsson W-Soho Page 2 Installation And Operation Manual Download | Manualshive

Page: 2 / 63

background image

Installation & Operation Manual

Copyright© 2010 LG-Ericsson Co. Ltd. All Rights Reserved

This material is copyrighted by LG-Ericsson Co. Ltd. (LGE).    Any unauthorized reproductions, use
or disclosure of this material, or any part thereof, is strictly prohibited and is a violation of Copyright
Laws.  LGE  reserves  the  right  to  make  changes  in  specifications  at  any  time  without  notice.  The
information  furnished  by  LGE  in  this  material  is  believed  to  be  accurate  and  reliable,  but  is  not
warranted to be true in all cases.

All  other  brand  and  product  names  are  trademarks  or  registered  trademarks  of  their  respective
companies.

For service and technical enquiries, contact your point of purchase/authorised LG-
Ericsson Dealer or Retailer in the first instance.

Technical assistance is available from Aria Technologies from 8.30am to 5.00pm eastern
standard/daylight saving time. Monday

– Friday on 1 902-297-646 at a cost of approximately

$1.50/min.

The method of signalling and connection between the devices is 1.88

– 1.89GHz SHF radio

transmission, utilizing Digital Enhanced Cordless Telecommunications (DECT) technology.
The products are fully compliant with Radiocommunications (Digital Cordless
Communications Devices

— DECT Devices) Standard 2007 made by Australian

Communications

And

Media

Authority

under

subsection

162

(1)

of

the

Radiocommunications  Act  1992.  As  with  any  radio  technology,  reception  distance,  quality
and performance are subject to local topographical and environmental conditions such as
shielding  (e.g.  concrete  ,  metal,  earth  etc),  electrical  interference  (power  transmission,
trains/trams,  motors,  machinery  etc)  and  R  interference  (radio,  TV,  wireless  devices
etc).Therefore no guarantee’s are given or inferred that the system and/or devices will work
in  accordance with  optimum  operating  specifications  under  all  conditions,  or  be  free  from
interference under any conditions.

For maximum range keep the base antenna free of any obstruction.

«
1
2
3
4
...
»

Summary of Contents for W-Soho
































































Reviews:

No comments

Related manuals for W-Soho

Brand: Panasonic Pages: 10

UltraShift PLUS

Brand: Eaton Pages: 2

Bell & Gossett ecocirc XL Series

Brand: Xylem Pages: 62

RainStation RS-0001

Brand: EarthMinded Pages: 16

Brand: Azden Pages: 12

AMERICAN STARPOWER X2

Brand: Nady Systems Pages: 2

Brand: Goodmans Pages: 22

Brand: Radio Shack Pages: 32

Brand: Daewoo Pages: 48

Brand: Grundig Pages: 16

Brand: Motorvac Pages: 16

Maestro 4625 Owner's

Brand: Aastra Pages: 38

Business Series Terminal T7000

Brand: Nortel Pages: 4

PWS BEV-300 Series

Brand: Pure Water Pages: 35

Brand: BT Pages: 72

Brand: Gigaset Pages: 74

ASY-12747-002 - RIM HS-655+ Bluetooth Headset

Brand: Blackberry Pages: 15

Brand: Sharp Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands