LG-Ericsson W-Soho Installation And Operation Manual Download | Manualshive

Page: 10 / 63

background image

Installation and Operation Manual

2

Figure 1.4-4 FAX or SLT call via SLT port of the LWS-BS

1.5 Important Safety Information

Read this information before installing your LWS system. Failure to comply with these guidelines could
prove either dangerous or illegal. This information helps to avoid personal injury, damage to the phone,
or other property damage.

1.5.1 Installation and Environment

1.  Install all phones according to the manual, failure to do so could affect product functionality.
2.  Do not install phones in direct sunlight so as to ensure full product functionality and fire prevention.
3.  Do not install in non-ventilated areas such as the inside of a desk or other enclosure so as to

ensure full product functionality and fire prevention.

4. Do not install the phones near appliances such as a TV, refrigerator, vacuum cleaner, audio

equipment etc. which may cause interference and affect voice quality.

5. Do not install the phones in an excessively dusty area so as to ensure full product functionality, fire

and electrical short prevention.

1.5.2 Electrical Considerations

1.  Do not overload the electrical outlet with power cords so as to prevent fire or electric shock.
2.  Do not touch the plug with wet hands. Failure to comply may cause electric shock.
3.  To disconnect any phone from the electrical socket grasp and pull the plug not the cord. Failure to

comply may cause fire or electric shock.

4. Do not cover the phones or place the phones or power adapter near a heating appliance. Failure

to comply may cause fire or electric shock.

5. Do not place objects on the power cord, or allow the power cord to excessively bend. Failure to

comply may cause fire or electric shock.

6. Do not modify or disassemble the power cord. If power cord or plug is impaired, do not use it.

Failure to comply may cause fire or electric shock.

7. Only clean power cord and plug when not plugged into the outlet, by rubbing the cord with a soft

cloth.. Failure to comply may cause fire or electric shock.

«
...
8
9
10
11
12
...
»

Summary of Contents for W-Soho
































































Reviews:

No comments

Related manuals for W-Soho

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 32

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 2

KX-TC1461B - Cordless Telephone

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 23

KX-T7885 - Battery For

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 52

Brand: Panasonic Pages: 48

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 132

Brand: Panasonic Pages: 12

HYBRID IP-PBX KX-TDA200

Brand: Panasonic Pages: 824

EASA-PHONE KX-T30810

Brand: Panasonic Pages: 16

Brand: Panasonic Pages: 76

Brand: Panasonic Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands