Lexus GX 460 2022 Owner'S Manual Download Page 366

Page: 366 / 660

364

GX460_OM_OM60U05U_(U)

4-5. Using the driving support systems

■

When the Crawl Control system is operated continuously

This may cause the brake actuator to overheat. In this case, the Crawl Control system will

stop operating, a buzzer will sound, the Crawl Control indicator will turn off after flashing

and the “TRAC OFF” indicator will come on. In this case, quickly stop the vehicle in a safe

place and give the actuator adequate time to cool off. Refrain from using the system until

the “TRAC OFF” indicator turns off. (The vehicle can be driven normally during this

time.)

■

When depressing the accelerator pedal while the Crawl Control is operating

Multi-terrain Select operates in AUTO mode. (



P. 292)

■

If the automatic transmission system overheats

The system will cease operation, a buzzer will sound and a warning message will be dis-

played to alert the driver. Stop the vehicle in a safe place until the warning message turns

off. (



P. 545)

■

Sounds and vibrations caused by the Crawl Control system

●

A sound may be heard from the engine compartment when the engine is started or just

after the vehicle begins to move. This sound does not indicate that a malfunction has

occurred in Crawl Control system.

●

Either of the following conditions may occur when the Crawl Control system is operat-

ing. None of these are indicators that a malfunction has occurred.
• Vibrations may be felt through the vehicle body and steering.

• A motor sound may be heard after the vehicle comes to a stop.

■

If the slip indicator comes on...

It may indicate a malfunction in the system. Consult your Lexus dealer.

WARNING

■

When using Crawl Control

Do not rely solely on the Crawl Control. This function does not extend the vehicle’s

performance limitations. Always thoroughly check the road conditions, and drive

safely.

■

These conditions may cause the system not to operate properly

When driving on the following surfaces, the system may not be able to maintain a fixed

low speed, which may result in an accident:

●

Extremely steep inclines.

●

Extremely uneven surfaces.

●

Snow-covered roads, or other slippery surfaces.

Summary of Contents for GX 460 2022





















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GX 460 2022

Reviews:

Related manuals for GX 460 2022

Brands by name

Popular brands

Lexus GX 460 2022, Owner'S Manual

Search results

Summary of Contents for GX 460 2022

Reviews:

Related manuals for GX 460 2022

Brands by name

Popular brands