Lexus GX 460 2022 Owner'S Manual Download Page 235

Page: 235 / 660

GX460_OM_OM60U05U_(U)

233

4-5. Using the driving support systems

ivi

Two types of sensors, located behind the front grille and windshield, detect infor-
mation necessary to operate the drive assist systems.

Radar sensor
Front camera

Sensors

WARNING

■

To avoid malfunction of the radar sensor

Observe the following precautions.
Otherwise, the radar sensor may not operate properly, possibly leading to an accident

resulting in death or serious injury.

●

Keep the radar sensor and the radar sensor cover clean at all times.

●

Do not attach accessories, stickers (including transparent stickers) or other items to

the radar sensor, radar sensor cover or surrounding area.

●

Do not subject the radar sensor or its surrounding area to a strong impact.

If the radar sensor, front grille, or front bumper has been subjected to a strong impact,

have the vehicle inspected by your Lexus dealer.

●

Do not disassemble the radar sensor.

●

Do not modify or paint the radar sensor or radar sensor cover.

●

In the following cases, the radar sensor must be recalibrated. Contact your Lexus

dealer for details.
• When the radar sensor or front grille are removed and installed, or replaced

• When the front bumper is replaced

Radar sensor
Radar sensor cover

If the front of the radar sensor or the front or

back of the radar sensor cover is dirty or

covered with water droplets, snow, etc., clean

it.

Clean the radar sensor and radar sensor

cover with a soft cloth to avoid damaging

them.

Summary of Contents for GX 460 2022





















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GX 460 2022

Reviews:

Related manuals for GX 460 2022

Brands by name

Popular brands

Lexus GX 460 2022, Owner'S Manual

Search results

Summary of Contents for GX 460 2022

Reviews:

Related manuals for GX 460 2022

Brands by name

Popular brands