Lexus GX 460 2022 Owner'S Manual Download Page 391

Page: 391 / 660

GX460_OM_OM60U05U_(U)

389

4-6. Driving tips

ivi

■

Tire chain installation

Observe the following precautions when installing and removing chains:

●

Install and remove tire chains in a safe location.

●

Install tire chains on the rear tires. Do not install tire chains on the front tires.

●

Install tire chains on rear tires as tightly as possible. Retighten chains after driving 1/4 -

1/2 mile (0.5 - 1.0 km).

●

Install tire chains following the instructions provided with the tire chains.

WARNING

■

Driving with snow tires

Observe the following precautions to reduce the risk of accidents.

Failure to do so may result in a loss of vehicle control and cause death or serious injury.

●

Use tires of the specified size.

●

Maintain the recommended level of air pressure.

●

Do not drive in excess of 75 mph (120 km/h), regardless of the type of snow tires

being used.

●

Use snow tires on all, not just some wheels.

●

Do not use LDA (Lane Departure Alert) system.

■

Driving with tire chains

Observe the following precautions to reduce the risk of accidents.

Failing to do so may result in the vehicle being unable to be driven safely, and may

cause death or serious injury.

●

Do not drive in excess of the speed limit specified for the tire chains being used, or 30

mph (50 km/h), whichever is lower.

●

Avoid driving on bumpy road surfaces or over potholes.

●

Avoid sudden acceleration, abrupt steering, sudden braking and shifting operations

that cause sudden engine braking.

●

Slow down sufficiently before entering a curve to ensure that vehicle control is main-

tained.

●

Do not use LDA (Lane Departure Alert) system.

NOTICE

■

Repairing or replacing snow tires

Request repairs or replacement of snow tires from Lexus dealers or legitimate tire

retailers.
This is because the removal and attachment of snow tires affects the operation of the

tire pressure warning valves and transmitters.

■

Fitting tire chains

The tire pressure warning valves and transmitters may not function correctly when tire

chains are fitted.

Summary of Contents for GX 460 2022





















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GX 460 2022

Reviews:

Related manuals for GX 460 2022

Brands by name

Popular brands

Lexus GX 460 2022, Owner'S Manual

Search results

Summary of Contents for GX 460 2022

Reviews:

Related manuals for GX 460 2022

Brands by name

Popular brands