Lexus GX 460 2022 Owner'S Manual Download Page 167

Page: 167 / 660

GX460_OM_OM60U05U_(U)

165

3-5. Opening, closing the windows and moon roof

Op
era
tio

n o
f e

ach
compone

●

If the moon roof tilts down but then tilts back up

Stop the vehicle.

Press and hold “



” on the

until the moon roof moves into the tilt up position

and stops.

Release “



” on the

once and then press and hold “



” on the

again.

The moon roof will pause for approximately 10 seconds in the tilt up position.

Then it will adjust slightly and pause for approximately 1 second.

Finally, it will tilt down, open and close.
Check to make sure that the moon roof is completely closed and then release the

switch.

: If the switch is released at the incorrect time, the procedure will have to be per-

formed again from the beginning.

: If the switch is released after the above mentioned 10 second pause, automatic

operation will be disabled. In that case, press and hold “



” on the

or “



” on the

and the moon roof will tilt up and pause for approximately 1 second. Then it

will tilt down, open and close. Check to make sure that the moon roof is completely
closed and then release the switch.

If the moon roof does not fully close even after performing the above procedure cor-

rectly, have the vehicle inspected by your Lexus dealer.

■

Customization

Settings (e.g. linked door lock operation) can be changed.

(Customizable features:



P. 600)

Summary of Contents for GX 460 2022





















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GX 460 2022

Reviews:

Related manuals for GX 460 2022

Brands by name

Popular brands

Lexus GX 460 2022, Owner'S Manual

Search results

Summary of Contents for GX 460 2022

Reviews:

Related manuals for GX 460 2022

Brands by name

Popular brands