Lexus GX 460 2022, Owner'S Manual

Page: 480 / 660

478
GX460_OM_OM60U05U_(U)
6-3. Do-it-yourself maintenance
■
Adding engine oil
If the oil level is below or near the
low level mark, add engine oil of the
same type as already in the engine.
Make sure to check the oil type and prepare the items needed before adding
oil.
Remove the oil filler cap by turning it counterclockwise.
Add engine oil slowly, checking the dipstick.
Install the oil filler cap by turning it clockwise.
■
Engine oil consumption
A certain amount of engine oil will be consumed while driving. In the following situations,
oil consumption may increase, and engine oil may need to be refilled in between oil
maintenance intervals.
●
When the engine is new, for example directly after purchasing the vehicle or after
replacing the engine
●
If low quality oil or oil of an inappropriate viscosity is used
●
When driving at high engine speeds or with a heavy load, when towing, or when driving
while accelerating or decelerating frequently
●
When leaving the engine idling for a long time, or when driving frequently through
heavy traffic
■
After changing the engine oil
The engine oil maintenance data should be reset. Perform the following procedures:
Press or of the meter control switches and select on the multi-informa-
tion display.
Press
or of the meter control switches and select “Vehicle Settings”, and then
press .
Press
or of the meter control switches and select “Oil Maintenance”, and then
press .
Select the “Yes” and press
.
“Reset Complete” will be displayed when the reset procedure has been completed.
Engine oil selection

P. 578
Oil quantity (Low

Full) 1.6 qt. (1.5 L, 1.3 Imp.qt.)
Items Clean funnel
1
2
3
1
2
3
4