6
Reattach the access cover.
7
Tighten the screws on the access cover.
8
Reattach the connector cover.
Installing a memory card
CAUTION—SHOCK HAZARD:
If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
1
Access the controller board.
For more information, see
“Accessing the controller board” on page 27
2
Unpack the memory card.
Warning—Potential Damage:
Do not touch the connection points along the edge of the card. Doing so may
cause damage.
3
Align the notch (1) on the memory card with the ridge (2) on the connector.
Additional printer setup
30
Summary of Contents for XM9100 Series
Page 1: ...XM9100 Series User s Guide June 2014 www lexmark com Machine type s 7421 Model s 039 239 439...
Page 246: ...Fuser area Below the fuser area Duplex area Above the duplex area Clearing jams 246...
Page 267: ...Area H8 Area H9 Clearing jams 267...
Page 270: ...7 Close the door 8 Close the scanner cover Clearing jams 270...
