Replace paper pick rollers in [paper source], use parts and instructions in tray 1 or
tray 2 compartment [80]
Try one or more of the following:
•
Replace the pick rollers, and then touch
Rollers replaced
on the control panel to clear the message and continue
printing.
•
Touch
Continue and replace later (Jams may continue to occur)
to ignore the message and continue printing.
Replace photoconductor, 0 pages remain [84.xy]
Replace the photoconductor unit to clear the message and continue printing. For more information, see the instruction
sheet that came with the supply or see
“Replacing a photoconductor unit” on page 213
Note:
If you do not have a replacement photoconductor unit, then see
“Ordering supplies” on page 211
or go to
Replace unsupported cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message and continue printing. For more
information, see the instruction sheet that came with the supply or see the “Replacing supplies” section of the
User’s
Guide
.
Note:
If you do not have a replacement cartridge, then see the “Ordering supplies” section of the
User’s Guide
or
visit
.
Replace unsupported photoconductor [32.xy]
Remove the photoconductor unit, and then install a supported one to clear the message and continue printing. For
more information, see the instruction sheet that came with the supply or see
“Replacing a photoconductor unit” on
.
Note:
If you do not have a replacement photoconductor unit, then see
“Ordering supplies” on page 211
or go to
Replace waste toner bottle [82.xy]
Replace the waste toner bottle to clear the message.
Restore held jobs?
Try one or more of the following:
•
From the printer control panel, touch
Restore
to restore all held jobs stored in the printer hard disk.
•
From the printer control panel, touch
Do not restore
if you do not want to restore any of the print jobs.
Scanner disabled by admin [840.01]
Print without the scanner, or contact your system support person.
Troubleshooting
283
Summary of Contents for XM9100 Series
Page 1: ...XM9100 Series User s Guide June 2014 www lexmark com Machine type s 7421 Model s 039 239 439...
Page 246: ...Fuser area Below the fuser area Duplex area Above the duplex area Clearing jams 246...
Page 267: ...Area H8 Area H9 Clearing jams 267...
Page 270: ...7 Close the door 8 Close the scanner cover Clearing jams 270...
