Holding faxes
Note:
Make sure that fax is configured. For more information, see
“Setting up the printer to fax” on page 55
1
From the home screen, touch
Settings
>
Fax
>
Fax Setup
>
Fax Receive Settings
>
Holding Faxes
.
2
Select a mode.
Forwarding a fax
Note:
Make sure that fax is configured. For more information, see
“Setting up the printer to fax” on page 55
1
Create a destination shortcut.
a
From the home screen, touch
Shortcut Center
.
Note:
The icon and name may have been changed. For more information, contact your administrator.
b
Select a printer function, and then touch
Create Shortcut
.
c
Configure the settings, and then touch
Save
.
d
Type a unique shortcut name.
e
Touch
OK
.
Note:
Take note of the shortcut number.
2
From the home screen, touch
Settings
>
Fax
>
Fax Setup
>
Fax Receive Settings
>
Admin Controls
.
3
Touch
Fax Forwarding
and then touch
Forward
or
Print and Forward
.
4
Touch
Forward to
, and then select a destination.
5
Select a destination type, and then enter the shortcut number of the destination.
Faxing
66
Summary of Contents for XM3250
