manualshive.com logo in svg

Lexmark XM3250, User Manual

The Lexmark XM3250 is a versatile printer that offers exceptional performance and reliability. To make the most of its features, it is important to have the User Manual handy. You can easily download this invaluable resource for free from our website, ensuring a seamless printing experience.

Share
Download
background image

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other
regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and
any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Innovation, Science and Economic Development Canada

This device complies with Innovation, Science and Economic Development Canada license-exempt RSS
standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device.

Innovation, Sciences et Développement économique Canada

Cet appareil est conforme aux normes RSS exemptes de licence d'Innovation, Sciences et Développement
économique Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit
pas causer d'interférences et (2) il doit accepter toutes les interférences, y compris les celles qui peuvent
entraîner un fonctionnement indésirable.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directive 2014/53/EU on the
approximation and harmonization of the laws of the Member States relating to radio equipment.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY,
40550 USA. The EEA/EU authorized representative is: Lexmark International Technology Hungária Kft., 8
Lechner Ödön fasor, Millennium Tower III, 1095 Budapest HUNGARY. The EEA/EU Importer is: Lexmark
International Technology S.à.r.l. 20, Route de Pré-Bois, ICC Building, Bloc A, CH-1215 Genève, Switzerland. A
declaration of conformity to the requirements of the Directives is available upon request from the Authorized
Representative or may be obtained at

www.lexmark.com/en_us/about/regulatory-compliance/european-union-declaration-of-conformity.html

.

Compliance is indicated by the CE marking:

Restrictions

This radio equipment is restricted to indoor use only. Outdoor use is prohibited. This restriction applies to all
the countries listed in the table below:

Notices

277

Summary of Contents for XM3250


































































































































































































































































































Reviews:

No comments

Related manuals for XM3250

Panasonic Workio DP-C262 Scanner Manual preview
Workio DP-C262
Brand: Panasonic Pages: 54
Panasonic KXMB2000E Important Information Manual preview
KXMB2000E
Brand: Panasonic Pages: 12
Panasonic KX-MB2000 Important Information Manual preview
KX-MB2000
Brand: Panasonic Pages: 12
Panasonic KX-MB1500E Important Information Manual preview
KX-MB1500E
Brand: Panasonic Pages: 8
Panasonic KX-FLB851 - All-in-One Flatbed Laser Fax Guía De Referencia Rápida preview
KX-FLB851 - All-in-One Flatbed Laser Fax
Brand: Panasonic Pages: 28
Panasonic KX-FLB751 Information Manual preview
KX-FLB751
Brand: Panasonic Pages: 2
Panasonic DP-MB350 Quick Reference Manual preview
DP-MB350
Brand: Panasonic Pages: 12
Panasonic DP-MB300 Quick Reference Manual preview
DP-MB300
Brand: Panasonic Pages: 12
VASTEX V-100 Manual preview
V-100
Brand: VASTEX Pages: 15
Oki MPS4200mb Safety Information Manual preview
MPS4200mb
Brand: Oki Pages: 40
Oki ML620 Manual De L'Utilisateur preview
ML620
Brand: Oki Pages: 104
Oki OKIOFFICE84 Garantie, Réglementation Et Spécifications preview
OKIOFFICE84
Brand: Oki Pages: 28
Oki OKIOFFICE84 Garantia, Informações Normativas E Especificações preview
OKIOFFICE84
Brand: Oki Pages: 23
Oki ML620 Guía Del Usuario preview
ML620
Brand: Oki Pages: 108
Oki ML620 Specifications preview
ML620
Brand: Oki Pages: 2
Oki ML490 Series Manual Do Usuário preview
ML490 Series
Brand: Oki Pages: 94
Oki ML490 Series Maintenance Manual preview
ML490 Series
Brand: Oki Pages: 135
Oki ML420 Series Manual Do Usuário preview
ML420 Series
Brand: Oki Pages: 97

Brands by name

Popular brands

Load more brands